FAQ
Typical questions we are receiving from ISPs
Please check full details in traffic section.
Total bandwidth we use depends on the number of shared IPs. Our usage is ~1GB/IP per month. The average traffic speed: 3-5 kbps per IP.
Both used and unused IPs can be utilized. IP allocation is not needed. This gives you the ability to monetize your whole network and not just the unused IP range.
Our global system rotates all the requests from our customers among all the available IPs . The more IPs you share , the more traffic will be sent through your router.
Rate card (per TB / month )
| Country | First 1TB / Month | Above 1TB / Month |
|---|---|---|
| United States | $300 | $200 |
| Canada | $300 | $200 |
| United Kingdom | $250 | $150 |
| West EU | $220 | $140 |
| Rest of the World | $150 | $100 |
An US based ISP with a /19 block can generate: $21k-$25k a year without any IP allocation.
By adding 6 lines of code into your MikroTik config, we create a GRE tunnel between our servers and your router.
Only sessions that match DIVI connection mark are routed back to our servers via GRE.
In order to participate with a Cisco or Juniper router you need to provide a VM. We will then install our software remotely in the VM which will create a GRE tunnel between our servers and the software. In your router you need to create PBR configuration to redirect very small portion of the traffic (0.2% to be exact) to the VM.
No. This is also technically impossible.
Since the MikroTik is a session aware router, the configuration that we provide will ensure that the traffic which belongs to sessions generated by our customers will be redirected through a tunnel to our PoPs while all of your users traffic will be routed as usual to your users. We have no visibility to the sessions that were not generated by our customers.
Yes, you can disconnect any time. There is no minimum commitment.
You are technically in control of everything.
